MTX Audio TA3404 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Audio-Equalizer MTX Audio TA3404 herunter. MTX Audio TA3404 User's Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 5
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
TA3404 Owners Manual
Introduction
Thank you for choosing MTX to help reach your ultimate goal with your vehicle. Adding MTX amplifiers and
matching MTX speakers and subwoofers with StreetWires connections will put you in a better position to
hear, feel and experience all of the music the artist intended you to hear.
Specifications
Primary Ratings:
Power Output: 50 Watts RMS x 4 Channels at 4 Ohms and 1% THD+N
Signal-to-Noise Ratio (1Watt): 78dB
Secondary Ratings
Power Output: 100 Watts RMS x 4 Channels at 2 Ohms and 1% THD+N
Power Output: 200 Watts RMS x 2 Bridged at 4 Ohms and 1% THD+N
Power Output: 400 Watts RMS x 1 Bridged at 2 Ohms and 1% THD+N
THD+Noise (Distortion) (1Watt): .25%
Frequency Response (-3dB): 20Hz-20kHz
Maximum Input Signal: 10V
Maximum Sensitivity: 100mV
Dimensions: 9-5/8” x 12-11/16” x 2-1/2” (245mm x 325mm x 65mm)
Smart Engage Auto Turn-on (Patent No: US06556683)
Patented Pure N-Channel Technology (Patent No: US05631608, US05783970)
Patented Power Supply (US05598325)
Input Sensitivity Switch: 100mV-1V/1V-10V
Summed Front Rear Line Level Output
Crossover: Hi,12dB / Low, 24dB Mono @ 85Hz, Defeatable
Remote Subwoofer Level Control
Dual Mono Output (Low pass on 4 Ch)
Features
1. Prizm EFX – All MTX amplifiers include backlit adjustment controls on top surface of product.
Color – The backlit controls offer unlimited colors on the display -- from RED, GREEN, BLUE, or any color
in between.
EFX – You can switch Prizm EFX lighting to “pulsate” with beat of music.
2. Xtant Technology Cooling (XTC) – thermal-regulated turbo-charged inner cooler, supplies fan forced cool
air evenly and constantly through tightly packed, bonded fins. Fan speed is continuously variable and
controlled by amplifier’s output load, temperature of heatsink and transformers. Exhaust of internal heatsink is
strategically positioned to cool transformers to maintain maximum performance at all volumes.
3. Bi-Level Inputs with Smart Engage – All MTX amplifiers feature RCA type input connections. All MTX
amplifiers allow both high level and line level input into the RCA type input connections.
Low Level Input – All MTX amplifiers feature RCA type input connections. Source units with an output
signal level of 100mV–10V may be used. See “Input Sensitivity” for proper voltage level setting.
High Level Inputs with Smart Engage – All MTX amplifiers allow high level inputs through RCA type input
connections using provided high level adapters. Source units with an output signal level of 100mV–10V may
be used. See “Input Sensitivity” for proper voltage level setting.
Smart-Engage” Auto-turn-on: is an auto turn-on circuit included within the amplifier. A remote turn-on
wire is not necessary when connecting the amplifiers high-level input to a high-powered source unit (Car
Stereo). The amplifier will automatically turn on when music is received through this type of connection.
Note: Smart engage is only active on the left input.
Seitenansicht 0
1 2 3 4 5

Inhaltsverzeichnis

Seite 1 - TA3404 Owners Manual

TA3404 Owners ManualIntroductionThank you for choosing MTX to help reach your ultimate goal with your vehicle. Adding MTX amplifiers and matching MTX s

Seite 2 - Installation - Mounting

4. Input Sensitivity –The Input Sensitivity switch is used to set the proper input voltage range: X1 POSITION: 100mV – 1V (Typically for RCA Input)

Seite 3 - Connections

Connections1. Bi-Level Inputs (Low/High Level Input) with Smart Engage – Both a low and high-level signal can be used. Be sure to lay the signal wire

Seite 4 - Feature Setup and Adjustments

2. GND: This is the ground connection for the amplifier and must be connected directly to the metal chassis of the vehicle for the amplifier to operate

Seite 5 - Troub le Shooting

• Setting For Components and Separates: First enable the electronic crossover by selecting the “ON” position of the X-OVER switch, then select the

Kommentare zu diesen Handbüchern

Keine Kommentare